Steel Bending & Forming
ProBender 35T Powered Horizontal Bender
Model 088 ProBender 35T Powered Bender
This is a highly versatile bending machine developed for workshop jobbing through to short run production applications. The built-in index stop can be used to minimize travel and speed up output in repetitive bending applications.
A wide range of optional attachments increase the versatility of the machine. All ProBender attachments are built for full force operation which eliminates the need for pressure regulation,making the machine very simple to use.
Supplied standard with a conventional V Former - 75mm optional attachments are:
- Pipe Bender to 2” 50mm
- Round Tube Bender to 1” 25mm
- Square Tube Bender to 1” 25mm
- Large Tube Bender 2” 50mm
- Rebar Bender from 1-1/4 or 32mm
- Pipe Notcher 1”,1-1/4,1-1/2, 2”
- Large V Former 125mm
Model 088 (Standard Supply Bramley ProBender 35t with V Former)
Mild Steel Bending Capacity:
- Flat Bar: 100mm x 10mm / 60mm x 12mm / 50mm x 16mm
- Square Bar: 25mm x 25mm
- Round Bar: Ø25mm
- Shipping: 300kg / 1350 x 700 x 980 mm
Proper environmental conditions
- Ambient temperature: 0 - 50°C
- Relative humidity: 20 - 85%
- The required space around the machine is at least 1000 mm
| Maxiumum Cold Steel Bending Model 088 | Standard “V” Former (Supplied) | Large “V” Former (Optional) |
|---|---|---|
| Flat bar | 100 x 10mm, 60 x 12mm, 50 x16mm | 100 x 16mm, 75 x 16mm, 50 x 20mm |
| Round bar | 25mm Re-bar | 32mm Re-bar |
| Square bar | 22 x 22mm | 28 x 28mm |
| Table dimensions | 540mm Width x 430mm Depth* | |
| Working height | 790mm | |
| Maximum stroke | 300mm | |
| Operating force | 350 kN | |
| High speed operation - advance and retract no load | ||
| Operating speed | 15 mm/sec | |
| Operating pressure | 20 MPa | |
| Operating flow | 14 L/min | |
| Low speed operation - advance at full load | ||
| Operating speed | 4 mm/sec | |
| Operating pressure | 28 MPa | |
| Operating flow | 3 L/min | |
| General Information | ||
| Oil capacity | 46 L | |
| Power | 3.0 kW, 3-phase 415V | |
| Current | 6.8 A | |
* Depth = distance from face of chuck to end of bed
Questions to ask when purchasing
Download ProBender 35T Marketing Brochure
Download Operating Instructions
Download ProBender 35T Service Manual
ProBender 35t Accessories
(Each Attachment Sold Separately)
Model 88-04L Large V Former Attachment
A heavy-duty former attachment designed to bend larger mild steel sections (cold): 75 x 16mm / 50 x 20mm.
- Throat width 5” / 125mm
Model 88-70 Pipe Bender Attachment
Pipe Bender Frame and Formers for bending pipe - 1/2”, 3/4”, 1”, 1-1/4”, 1-1/2” & 2” N.B.
Model 88-80 Rebar Bending Attachment
Rebar/Mild Steel Bender Frame and Formers for forming rebar - up to 32mm.
.
Model 88-50 Round Tube Bending Attachment
Supplied with Formers for bending tube - 1/2”, 5/8”, 3/4”, 7/8” & 1” (1-1/8” optional additional supply).
Model 88-50SQ Square Tube Bending Attachment
Supplied with Formers for bending square tube - 1/2”, 5/8”, 3/4”, 7/8” & 1”.
Model 88-90 Pipe Notcher Attachment
For easy notching of pipes for lateral weld connections.
Different size dies sold separately (1-1/4”, 1-1/2” & 2”).
Model 88-120 Stop Gauge Attachment
A multi-adjustable feed stop for fast, repetitive and consistent bending.
Model 88-130 Flattening Attachment
For pressing work between two parallel flat faces – from flattening pipe to assembly of bearing assemblies.
- Splaying angle iron for fencing
- Flattening pipe ends for welding
- Straightening objects i.e. pipe, bar etc
- Assembly of components
