Steel Bending & Forming

Electric Hydraulic Thin Wall Tube Bender

bramley-logo-machine-tools-small


Bramley Model 068HE

The Bramley 068HE is a non-mandrel type thin wall tube bender. Only the external wall of the tube is supported during the bending process so some minor deformation of the tube occurs. 

Non-mandrel tube benders should NOT be used where a perfectly uniform finish quality is required.   

Generally when bending thin wall tube, the thicker the tube wall the better the bend achieved.

All bending with Stainless Steel is subject to grade and the following is a guide only.  As a rule the harder the grade (higher the Nickel content) the smaller OD tube that can be bent.

Mild Steel: 1” - 2” OD (1.6mm - 2.0mm wall thickness) capacity

Aluminium: 1” - 2” OD (2mm – 3+mm wall thickness) capacity

Stainless Steel: 1” – 1-1/2” OD (1.6mm – 2.0mm wall thickness) capacity

  • 180° maximum bend for producing U-bends
  • Supplied with tripod stand
  • Former & Slipper Sets sold separately
  • Shipping: 60kg / 0.05m3

 

 

Model 068H Head Assembly

  • Sold separately and can be retrofitted to Bramley 026E Electric Hydraulic Pipe Bender
  • Formers & Slippers not included
068H head assembly Jan 2024

TUBE SIZEPART No. BEND RADIUS
1" (25.4mm)68-24PK115mm
1.1/8" (28.6mm)68-25PK115mm
1.1/4" (31.8mm)68-26PK115mm
1.3/8" (35mm)68-27PK140mm
1.1/2" (38mm)68-28PK140mm
1.5/8" (41.3mm)68-29PK140mm
1.3/4" (44.5mm)68-30PK165mm
1.7/8" (47.6mm)68-31PK165mm
2" (51mm)68-32PK165mm

Former and Slipper Sets sold separately

Tube-bender-former-slipper