Steel Drilling
Workshop Drill Presses
Workshop Drill Presses are designed for intermittent use applications only!
For continuous use applications, select an Industrial Model.
Model DBW16 - Garrick Workshop Bench Drill 16mm
Ideal for the jobbing workshop
Garrick Workshop Drill Presses have been specifically configured to deliver maximum features and performance during intermittent work duty.
This is a great drill press for your home, farm or light engineering workshop. Easily fitted to your existing bench, it will provide accurate drilling capabilities for all nature of jobs you may have. The maximum hole size of 16mm will cover the majority of work encountered, while the table size will enable complex shapes to be bolted down and positioned where required. The easy height adjustment via the rack and pinion will aid safety and speed of operation.
The no voltage safety switch ensures your safety is maintained even with power outages, while the flip up safety guard around the chuck is quick to operate but keeps swarf away from the operator, especially the face and eyes.
Model DPW16 - Garrick Workshop Pedestal Drill 16mm
Ideal for the jobbing workshop
Garrick Workshop Drill Presses have been specifically configured to deliver maximum features and performance during intermittent work duty.
This is a great drill press for your home, farm or light engineering workshop. The full-size floor mount pedestal format sets it at an easy working height and frees up bench space. It will provide accurate drilling capabilities for all nature of jobs you may have. The maximum hole size of 16mm will cover the majority of work encountered, while the table size will enable complex shapes to be bolted down and positioned where required. The easy height adjustment via the rack and pinion will aid safety and speed of operation.
The no voltage safety switch ensures your safety is maintained even with power outages, while the flip up safety guard around the chuck is quick to operate but keeps swarf away from the operator, especially the face and eyes.
| MODEL | DBW16 | DPW16 |
|---|---|---|
 |  | |
| Type | Bench | Pedestal |
| Motor | 550W | 550W |
| Drive Belts | O Section | A Section |
| Max Drilling Diameter | Ø16mm | Ø16mm |
| Chuck Capacity | 3-16mm | 3-16mm |
| Spindle Travel | 80mm | 80mm |
| No. of Speeds | 12 | 12 |
| Speeds | 180-2770 / 220-3320 rpm | 180-2770 / 220-3320 rpm |
| Spindle Taper | MT2 | MT2 |
| Spindle-column Distance | 162.5mm | 162.5mm |
| Spindle-Table Distance | 450mm | 725mm |
| Spindle-Base Distance | 630mm | 1205mm |
| Swing | 325mm | 325mm |
| Table Size | Ø290mm | Ø290mm |
| Base Size | 420 x 250mm | 460 x 270mm |
| Column Diameter | Ø 72mm | Ø 72mm |
| Height | 980mm | 1580mm |
| Net weight | 33kg | 40kg |
| Carton Size | 770 x 450 x 260mm | 1110 x 460 x 275mm |
Recommended Drilling Speeds
Use these drilling speeds as a basic guide for twist drills. For stainless steel, use a slower speed than recommended for steel. It is essential not to run a drill too fast on stainless steel as it will heat up easily and become hard, making it very difficult to drill.
| Drill Bit Diameter | Steel | Aluminium |
|---|---|---|
| 5mm | 1290 rpm | 1820 rpm |
| 10mm | 500 rpm | 600 rpm |
| 15mm | 277 rpm | 350 rpm |